Date and time setting, Auto setting | Sanyo SO-WIN-KF3AC manual

Chapter 6 Basic setting and operation

Item	Description

NTP address	Enter the address of NTP server. Please consult your
	network administrator for setting up of the NTP server.
Temperature	Switches display temperature unit Centigrade or
	Fahrenheit
Time setting	When clicking AUTO button, the date and time set on
	your computer are set to the projector. The timer icon
	appears when time is set up correctly.
Current time	Indicates current date and time set on the projector
Date	Sets date in manual
Time	Sets time in manual

Date and time setting

NTP is abbreviated expressions of Network Time Protocol. It is a protocol to acquire the exact current time via the network. This projector acquires the current time from the NTP server and update the time in the network module. After setting the NTP address, the projector acquires the time per 24 hours. If the projector fails acquiring the time from the NTP server, the projector tries to acquire the time every 1 hour until it succeeds.

When the NTP address is not set, perform the time setting with "Auto-setting" or "manual setting" described below.

Auto setting

Click AUTO button on the page, the date and time set on your computer are set to the projector.

Note:

Confirm that your computer has a correct clock time before performing the auto time setting.

Manual setting

Click the item Date or Time and enter the date or time on the input box with adequate format.

Date is in year/month/day format. ex. 2007/10/05

Time is in 24-hour:minute format. ex. 18:30

50

This projector does not provide the built-in battery. The date and time information are lost when the projector turns off ( when "Eco" is set for the stand-by mode (Refer to p.72)), or the network configuration is reset, or the input mode "Wired" or "Wireless" is turned. The timer function is disable until time is set up correctly. When using the NTP address for time setting, the current time is acquired at the projector starting up and the timer function is activated after finishing the time setting correctly.

Image 50

Sanyo SO-WIN-KF3AC, QXXAVC922---P owner manual Date and time setting, Auto setting, Manual setting

Contents

Network Set-up and Operation For Windows FCC Warning Federal Communications Commission NoticeFor Canadian Users FCC RF Exposure Warning Bestimmungen der Richtlinie 1999/5/EG befindet Use of this manual Trademarks and CopyrightExpression/Abbreviation Table of contents 109 127 Required to support any of VGA 640 x 480, Svga Required operating environment for computers256MB or more for Windows 2000 or Windows XP Network Network specifications of the projector Chapter About LAN functions Flow of Image Transfer LAN functions and the featuresImage projecting system via LAN An example of the connection LAN connection modes Operate the computer mouse with the remote control About LAN functions Setup procedures Network Configuration has completed Install the software on computersLAN and set the configuration Select Wired LAN or Wireless LAN then connect Installing the software Network Viewer & Capture 5 installation Setup procedures Network Viewer 5 File Converter Installed softwareNetwork Capture Network Viewer 5 Program Editor File Converter 2 installation Installed software and places Names and functions of the operation screen Network connection standby display Network Capture 5 window Parts Names and Functions of the Screen Using the multiple network adaptors Wired LAN configurations Connecting to the LAN line Network environment settings Description Confirming the operation Confirming the operation Network information Wired factory defaultNetwork PIN code Wired LAN factory default settings Selected LAN Wired LAN configurations Wireless LAN configurations Setting the network environment Setting procedures Identifier of the wireless access point WPA2-PSK are not available Configuring security with the projector Use of security type WEP Available PSK key characters Digits Easy wireless setting Setting Procedures Wireless factory default Computer environment and Wireless LAN connection Wireless indicator display Wireless LAN factory default settings Selected LAN Basic setting and operation Select a display mode and login Starting up the Browser Setting Display of main settingMain setting page in the Standard Mode display Main menu Example of the Setting How to use the settingMain setting page in the Light Mode display Setting Pallet Pull-down menu setting Type of the setting palletText box setting Radio button setting Password for PJLink function Initial settingSwitches PJLink password authentication on or off Japanese Whats PJLink? Network PIN code settingPJLink and password setting Manual setting Date and time settingAuto setting Selects LAN1 to LAN5 and Simple Network configurationSetting of LAN Sets Dhcp or Manual Basic setting and operation Configuring wireless LAN setting and security setting Configuring wireless LAN setting Configuring wireless LAN security setting ItemDescription Mail setting Setting Smtp server and administrator address Hours. Attached message Registering and deleting E-mail addressesOption selection for sending alert mail Examples Type and contents of alert mail When PJ lamp replacement time is reached When lamp corres. value reaches preselect use time Enter place of the projector optional Snmp settingEnter user name of the projector etc. optional Community Up to 10 trap addresses can be registered Check and delete the trap addressPublic Trap option setting Basic setting and operation Controlling the projector PJ temp Power control and status checkPJ status About projector condition Status Description Controls Input System Image adjustment Image mode Video Computer Suppresses the sound Adjusts the sound volume from the speakersSound PC adjustment Table below Setting up the projectorScreen mode Video Normal True Wide Full Custom Sets the auto-input signal detection mode Sets Auto PC Adjustment modeSets Auto Keystone mode Standby mode Lamp counter resetting Reset the time after lamp replaced Set a day or date Timer settingHow to set the timer Set an execute time Check the timer eventsChange the event mode Select an event action Time Projector PowerEvent Projector information Items Description Indication of the lamp status Example of multi control Controlling and setting the multi-projectorsMulti-control Menu are linked to the main menu Start/stop the multi controlStops multi control function Register the projector Confirmation of registered projector Status Change the mode of the registered projectorMode Operation Check & Change page in the light mode Check & Change page in the light modeSetting all together Controlling all together Viewer auto setting all together Network capture functions Real Time Capture +p.89 About Network Capture functionStart up the Network Capture Network Communication +p.94 Menu during Moderator function Commands on the task barMenu during Real time capturing Menu during Network Communication Parameter set up Using the Real Time Capture Registering the computers Control by the computer Real time capturing operation Set enable or disable the real time capturingControl by the web browser Control by the projector Setting condition Example of advanced use Using the Network Communication PC6 Settings before using the Network Communication Menu tree Description of capture editing window Tool bar button names How to use the Network communication Drawing figures Setting of the drawing tool attributeEdit capture image Erase drawn objects Drawing letter Letter attribute setting100 Set type face, style, size and effects of the font Preparation Network Communication operation and change of state101 On the Communication Executing the forcing mode 102 Moderator Moderator function103 Clients Moderator mode application window Preparation for using the moderator functionNormal mode application window 104 Description of application window Using the moderator function105 Moderator operation 106 Moderators password setting upUnregister moderator status 107 Error informationError messages Cause and corresponding 108 Network Viewer functions 109 Creating the available data Network Viewer How to use the Network Viewer 5 File ConverterMenu Command Tool Button 110 111 Command Tool ButtonCreating the available data Menu Sub Menu Description View Network Viewer functions Output destination Setting of output destination and conversion modeConversion mode 113 Select a folder and click Save button 115 Procedure of making programCreating a program file Program Editor Deletes the folder path from the folder list 116Displays the folder selection window Moves up the selected folder path Sub menu Description Setting up the display order and time of the images117 Added Moved Image frame on the index window118 Limitation of the Program file Example of the created program selection119 Condition to use the Network Viewer function Using the Network Viewer function120 121 Setup the setting page 1 of the Visual displaySetup the setting page 2 of the Selection Display 122 Means endless play Auto Display setting and control123 124 Error informationError type Description 125 Display time Repeat times 126 Appendix 127 Control Use of telnet128 Command Function 129 Flash Player enable Web browser settingActive Script/JavaScript enable Proxy setting 131 ActiveX controls and plug-ins settingWindows XP Professional Examples OS/Browsers Not using proxy server Flash Player Add-on settingUsing proxy server 132 Netscape Navigator Flash Player Plug-in setting133 134 Firewall setting 135 Troubleshooting 136 No setting is required. Automatically set as Dhcp Infrastructure ModeShould be same as the setting of the access point 137 138 Cannot be turned on/off with the web browser 139 Speed of playing back images are very slow Cannot make a new program file 140Images from the file server don’t appear on the screen? What kind of image formats can I convert? 141 Terminology 142 143 SO-WIN-KF3AC