Sanyo QXXAVC922---P, SO-WIN-KF3AC owner manual Trap option setting, SNMP setting

SNMP setting

Trap option

Trap option setting

Tick the check boxes in front of the condition item to send the trap.

✐Click Set button if you tick or un-tick the check box on a page.

[1]––––––––––––––––––––––––––––––––––

oWhen PJ lamp is off.

oWhen PJ lamp replacement time is reached.

oWhen internal PJ power circuit is failed.

oWhen internal PJ temperature is too high.

[2]––––––––––––––––––––––––––––––––––

oWhen PJ is turned into Standby in proper user operation.

oWhen accumulated filter use time

reaches [ ] hours.

oWhen Power management function turns PJ lamp off.

[3]––––––––––––––––––––––––––––––––––

oWhen the signal is interrupted.

oWhen Auto Play is failed.

oWhen lamp Corres. Value

reaches [ ] hours.

✐ Up to 99,999 hours can be set for the time setting.

✐ If condition "When Auto Play is failed" is checked, the trap is sent when the error occurs during the auto display operation using with the network viewer function (+p.109). For further information of the error, refer to item "Auto Display setting and control page [3]"((+p.123).

61