32
Selecting the output video signals
—VIDEO OUTPUT
To use the video conversion function (see page 9), you need to
select this setting according to the connection method for a TV.
VIDEO OUTPUT: HDMI
Select this when connecting a TV with the HDMI cable.
VIDEO OUTPUT: CMPNT
Select this when connecting a TV with the component
video cable.
VIDEO OUTPUT: S
Select this when connecting a TV with the S-video cable.
VIDEO OUTPUT: C
Select this when connecting a TV with the composite
video cable.
Initial setting: VIDEO OUTPUT: HDMI
NOTE
To transmit the video signals selected in this setting, you need to
connect a TV and this receiver with the cable which can transmit
the selected video signals.
Superimposing the menus
—SUPERIMPOSE
You can select whether or not to superimpose the on-screen
display on the TV screen.
SUPERIMPOSE: ON
Select to superimpose the on-screen display on the TV
screen.
SUPERIMPOSE: OFF
Select to cancel superimposition. The on-screen display will
be shown on the blue background screen.
Initial setting: SUPERIMPOSE: ON
NOTES
•Some on-screen displays appear on the TV screen regardless
of this setting.
•When the video input setting (see page 20) is set to “CMPNT,”
the on-screen display will be shown on the blue background
screen even though “SUPERIMPOSE” is set to
“SUPERIMPOSE: ON.”
•The on-screen display does not appear on the TV screen when
the video input setting (see page 20) is set to “HDMI.”
Memorizing the volume level for each
source—ONE TOUCH OP
This receiver memorizes some settings separately for each
source. In addition, you can store the volume level for each source
with the other memorized settings. (See page 22.)
•This receiver memorizes the volume level
– when you turn off the power, and
– when you change the source.
ONE TOUCH OP: ON
Select to store the volume level separately for each
source. (The ONE TOUCH OPERATION indicator lights
up on the display.)
ONE TOUCH OP: OFF
Select this not to store the volume level.
Initial setting: ONE TOUCH OP: OFF
To recall the volume level
With the ONE TOUCH OPERATION indicator lit, the volume level
for the currently selected source is recalled when the source is
selected.
To cancel the One Touch Operation
Set One Touch Operation to “ONE TOUCH OP: OFF” so that the
ONE TOUCH OPERATION indicator goes off from the display.
Selecting the source for HDMI terminal and
COMPONENT VIDEO jacks—HDMI SELECT/
CMPNT SELECT
When you connect a VCR or a DBS tuner to the VCR (DBS) IN
terminal (jacks) in HDMI terminal or COMPONENT VIDEO jacks
on the rear of the receiver, you need to select either “VCR” or
“DBS” according to the component you connect.
If you have not selected appropriate source, you cannot view the
playback picture on the TV.
For the HDMI terminal:
HDMI SELECT: VCR
Select this when assigning the HDMI terminal for
a VCR.
HDMI SELECT: DBS
Select this when assigning the HDMI terminal for
a DBS tuner.
Initial setting: HDMI SELECT: VCR
For the COMPONENT VIDEO jacks:
CMPNT SELECT: VCR
Select this when assigning the COMPONENT
VIDEO jacks for a VCR.
CMPNT SELECT: DBS
Select this when assigning the COMPONENT
VIDEO jacks for a DBS tuner.
Initial setting: CMPNT SELECT: VCR
23-32RX-D701S[A]_f.p65 05.9.23, 11:05 AM32