JVC RX-D701S manual Menu operating procedure

Menu operating procedure

When operating, the on-screen display appears on the TV screen regardless of the SUPERIMPOSE setting (see page 32).

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

In this section, the operation of the remote control is used for explaining.

Ex.: When adjusting subwoofer output level.

Operations On the TV screen On the display

1 To start the adjustment, press							HP
						O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
						x	ATT
ADJUST.	ADJUST MENU (1)						MHz
	5						kHz
The setting item previously selected can be shown	SUBWOOFER		LEVEL :		0	The submenu previously
	FRONT	L	LEVEL :		0
on the TV screen by pressing ADJUST on the front	FRONT	R	LEVEL :		0	selected appears.
	CENTER		LEVEL :		0
panel when the receiver is in normal operation
	SURR	L	LEVEL :		0
mode.	SURR	R	LEVEL :		0
	S BACK L		LEVEL :		0
	S BACK R		LEVEL :		0
	∞
	:ENTER			:EXIT

The setting item previously selected appears.

2To select the desired submenu, press 5 or ∞ repeatedly.

There are four screens from “ADJUST MENU (1)” to “ADJUST MENU (4).” To change the screen, simply pressing 5 or ∞ repeatedly. You can go to the next/ previous screen.

• On the front panel, turn MULTI JOG.

3Press SET.

SUBWOOFER LEVEL SUBWOOFER LEVEL :2 03

O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEPAUTO MODE x

The current setting of the

selected item appears.

23:OPERATE :BACK

The selected submenu appears.

4To select the appropriate setting, press

2or 3 repeatedly, then press SET.

The on-screen display returns to the previous ADJUST MENU. In this example, “ADJUST MENU (1)” appears on the TV screen and “SUBWFR LVL” appears on the display.

•On the front panel, turn MULTI JOG, then press SET.

O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEPAUTO MODE

SUBWOOFER LEVEL x

SUBWOOFER LEVEL :2 03

–10 0+10

5Repeat steps 2 to 4 to set other items if necessary.

NOTE

To exit from menu operations, press EXIT on the remote control. On the front panel, press ADJUST.

35