10
Åı
Î
Ç
MONITOR OUT
‰
Y
PB
PR
COMPONENT VIDEO
MONITOR
OUT
DVR/DVD
IN
VCR(DBS)
IN
TV
IN D
B
I
N
L
R
MONITOR
OUT
/
DVD
P
LAY)
110V
127V
220V
230 -
240V
Select the appropriate VIDEO OUTPUT (see page 32)
according to the terminal used for TV connection referring
to the table below.
Connection method VIDEO OUTPUT
HDMI HDMI
Component video CMPNT
S-video S
Composite video C
7Connecting a TV:
Connect the TV to the appropriate MONITOR OUT jacks to view the playback picture from any other connected video components.
HDMI cable (not supplied)
Green
Blue
Red
Component video cable
(not supplied)
TV
ÅTo left/right audio channel output
ıTo HDMI input
ÇTo component video input
•Connect Y, PB, and PR correctly.
ÎTo S-video input
‰To composite video input
Turn off all components before making connections.
•When you connect other components, refer also to their manuals.
Do not connect the AC power plug to the wall outlet until all connections are completed.
: signal current
DO NOT use a TV through a VCR or a TV with a built-in
VCR; otherwise, the picture may be distorted.
S-video cable (not supplied)
Stereo audio cable
(not supplied)
Composite video cable (not supplied)
Red
White
NOTES
•If connecting a TV only with the HDMI cable and setting the video input setting (see page 20) to “HDMI,” the on-screen display does
not appear on the TV screen. When using on-screen display, set the video input setting to the setting other than HDMI.
•Select the audio and video input setting according to the connection method. See page 20 for details.
•In addition to using the HDMI cable, you can enjoy digital sound as well using a digital audio cable (coaxial or optical). For details of
digital audio connection, see page 16.
•When you enjoy contents protected by HDCP (High-Bandwidth Digital Content Protection, see page 1), connect a HDCP-compatible
TV to this receiver, otherwise, the picture may not appear properly.
09-15RX-D702B[UJ]_f.p65 05.9.9, 4:50 PM10