JVC RX-D701S manual Sirius radio

Operating other

JVC products

You can use the supplied remote control to operate not only this receiver but also other JVC products.

•Refer also to the manuals supplied with the other products.

–Some JVC VCRs can accept two types of the control signals—remote codes “A” and “B.” This remote control can operate a VCR whose remote control code is set to “A.”

–Some JVC DVD recorders can accept four types of the control signals. This remote control can operate a DVD recorder whose remote control code is set to the initial code. For details, refer to the manual supplied with the DVD recorder.

•To operate other products, aim the remote control directly at the remote sensor on the target product.

7VCR

1 2 3

4 5 6

7 8 9

10 0 10

7SIRIUS radio

1 2 3

4 5 6

7 8 9

10 0 10

7TV

1 2 3

4 5 6

7 8 9

10 0 10

You can always perform the following operation:

VCR : Turn on or off the VCR.

After pressing VCR, you can perform the following operations on the VCR.

CHANNEL +/–:	Change the channel numbers on the VCR.
1 – 9, 0:	Select the channel numbers on the VCR.
3:	Start playback.
7:	Stop playback.
8:	Pause playback. To release it, press 3.

FF:Fast-wind a tape.

REW:	Rewind a tape.
+ 3:	Start recording.
+ 8:	Enter recording pause. To start recording,
	press 3.

After pressing SIRIUS, you can perform the following operations on the SIRIUS radio.

You can always perform the following operations:

TV VOL +/–:Adjust the volume on the TV.

TV/VIDEO:Change the input mode (either video input or TV tuner) on the TV.

After pressing TV, you can perform the following operations on the TV.

TV/SIRIUS :	Turn on or off the TV.
CHANNEL +/–:	Change the channel numbers.

1 – 9, 0, 100+ (+10): Select the channel numbers.

RETURN (10): Switch between the previous channel and the current channel.

TV/SIRIUS : Turn on or off the SIRIUS radio.

CAT 9/( CAT: Change the category of the program.

CHANNEL +/–:Change the channel numbers on the SIRIUS radio.

1 – 6, BAND: Store or tune in to the preset channel.

MEMO:Store information on the display of the SIRIUS radio.

SELECT: Select an highlighted item on the display of the SIRIUS radio.

DISP:Change the text size on the display of the SIRIUS radio.

PREV:Return to the previous channel.

NOTE

The remote control may not operate properly for a SIRIUS radio other than KT-SR2000 (JVC SIRIUS radio).

48