JVC RX-D701S manual Sound adjustments

Sound adjustments

You can make sound adjustment to your preference after completing basic setting.

Basic adjustment items

You can adjust the following items. See pages in parentheses for details.

•You cannot select the items which is not available with the current setting.

•The name of the item shown below is the on-screen display indication and the name in parentheses is the display indication.

Items	To do
SUBWOOFER LEVEL*1 Adjust the subwoofer output level. (36)
(SUBWFR LVL)
FRONT L LEVEL*1*2	Adjust the left front speaker output level.
(FRONT L LVL)	(36)
FRONT R LEVEL*1*2	Adjust the right front speaker output level.
(FRONT R LVL)	(36)
CENTER LEVEL*1*2	Adjust the center speaker output level. (36)
(CENTER LVL)
SURR L LEVEL*1*2	Adjust the left surround speaker output level.
(SURR L LVL)	(36)
SURR R LEVEL*1*2	Adjust the right surround speaker output
(SURR R LVL)	level. (36)
S BACK L LEVEL*1*2	Adjust the left surround back speaker output
(S BACK L LVL)	level. (36)
S BACK R LEVEL*1*2	Adjust the right surround back speaker
(S BACK R LVL)	output level. (36)
S BACK LEVEL*1*2	Adjust the surround back speaker output
(S BACK LVL)	level. (36)

DIGITAL EQ 63Hz (D EQ 63Hz)*1

DIGITAL EQ 250Hz (D EQ 250Hz)*1

DIGITAL EQ 1kHz (D EQ 1kHz)*1

DIGITAL EQ 4kHz (D EQ 4kHz)*1

DIGITAL EQ 16kHz (D EQ 16kHz)*1

	Adjust the equalization pattern of each
	band. (37)
BASS BOOST	Boost the bass level. (37)
(BASS BOOST)
INPUT ATT	Attenuate the input level of analog source.
(INPUT ATT)	(37)
EFFECT*1	Adjust the effect level. (37)
(EFFECT)
ROOM SIZE	Select the room size for your virtual listening
(ROOM SIZE)	room. (37)
LIVENESS	Select the liveness level for your virtual
(LIVENESS)	listening room. (38)
PANORAMA	Add “wraparound” sound effect with side-
(PANORAMA)	wall image. (38)
CENTER WIDTH	Adjust the center channel localization
(CENTER WIDTH)	between the center speaker and the left/
	right speakers. (38)

Items	To do
DIMENSION	Adjust sound localization pattern. (38)
(DIMENSION)
CENTER GAIN	Adjust the sound localization of the center
(CENTER GAIN)	channel. (38)
CENTER TONE*1	Make the center tone soft or sharp. (38)
(CENTER TONE)
CNTR ALIGNMENT	Align the vertical localization of the center
(CENTER ALIGN)	channel signals. (38)

*1 You can adjust these items directly from the remote control. *2 If you have used Smart Surround Setup on pages 23 and 24,

these settings are not required.

NOTE

Some items are not available when multi channel PCM (see page

42)signals recorded in DVD-Audio are coming. See page 12 for details.

Operation through on-screen display menus

You can make adjustments to the basic settings easily by using the on-screen display menus.

Menu operation buttons

On the front panel:

Button / JOG	To do
ADJUST button	show adjustment item previously selected.
SET button	move to the selected menu or return to the
	previous ADJUST MENU.
MULTI JOG	• select a menu or an item.
	• change a setting.

From the remote control:

Button	To do
ADJUST button	show adjustment item previously selected.
5 / ∞ buttons	select a menu or an item.
SET button	move to the selected menu or return to the
	previous ADJUST MENU.
EXIT button	exit from the ADJUST MENU.
2 / 3 buttons	change a setting.

English

CONTINUED ON THE NEXT PAGE

33