JVC RX-D701S Connections 1 AV Compu Link connection, Connections 2 Video cable connection, Case

AV COMPU LINK remote control system

The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, DVD player*, and VCR) through this receiver.

This receiver is equipped with the AV COMPU LINK-III, which has added a function to operate JVC’s video components through the component video jacks. To use this remote control system, you need to connect the video components you want to operate, following the diagrams below and the procedures on page 47.

• Refer also to the manuals supplied with your video components.

*“DVD player” on pages 46 and 47 can be replaced with “DVD recorder.”

Connections 1: AV COMPU LINK connection

TV

AV	AV
COMPU LINK-III	COMPU LINK EX

Monaural mini-plugs (not supplied)

AV

COMPU LINK-III

NOTES

•When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic selection of TV’s input mode (see page 47).

•When connecting only the VCR and DVD player to this receiver, connect it directly to the receiver using cable with the monaural mini-plugs.

•You can connect only the TV with AV COMPU LINK EX or AV COMPU LINK-IIIterminal to the AV COMPU LINK-IIIterminal.

Connections 2: Video cable connection

This receiver is equipped with three types of the video terminals other than the HDMI terminals—composite video, S-video, and component video, and the signals coming into this receiver through one type of video terminals can output only through the terminal of the same type. So you need to connect the video components to this receiver using one of the following three ways.

•When using the AV COMPU LINK remote control system, set the video output and video input setting for the DVD player and the VCR correctly (see “Selecting the video input setting” on page 20 and “Selecting the output video signals—VIDEO OUTPUT” on page 32); otherwise, the correct input for this receiver will not be selected on the TV.

Case 1:

When connecting the source equipment to the receiver through the S-video terminals, connect this receiver to the TV’s video input 1 terminal using S-video cables.

	S-video cable		S-video cable
Source		RX-D701S		TV
equipment
			To video input 1

Case 2:

When connecting the source equipment to the receiver through the composite video jacks, connect this receiver to the TV’s video input 2 terminal (composite video input) using composite video cables.

Monaural mini-plugs (not supplied)

AV

COMPU LINK

DVD player

AV

COMPU LINK

Composite video cable		Composite video cable
Source	RX-D701S			TV
equipment
			To video input 2
			(Composite)

Case 3:

When connecting the source equipment to the receiver through the component video jacks, connect this receiver to the TV’s video input 2 terminals (component video input) using component video cables.

VCR

IMPORTANT:

The AV COMPU LINK remote control system cannot control the DBS tuner connected to the DBS IN jacks.

Component video cable		Component video cable
Source	RX-D701S			TV
equipment
			To video input 2
			(Component)

46