Craftsman 79244 HeoBadeBh% B,ade, B,adeBhied, Knowyourbrushcutter Attachment, Blade, Trimmer Head

KNOWYOURBRUSHCUTTER ATTACHMENT

READ THiS OPERATOR'SMANUAL AND SAFETY RULES BEFORE OPERATING YOUR BRUSHCUTI-ER ATTAOHMENT Compare the illustrations with your unit to familiarize

yourself with the location of various controls and adjustments. Save this manual for future reference.

Hanger j

immer Shield _

B,adeBhied

HeoB'adeBh% B,ade

BLADE

The BLADE is designed for cutting grass, weeds, and brush up to 1/2 inch (1 cm) in diameter.

TRIMMER HEAD

The TRIMMER HEAD holds cutting line and is designed for cutting grass and light weeds.

BLADE SHIELD

The BLADE SHIELD provides protection from the spinning blade.

TRIMMER SHIELD

The TRIMMER SHIELD provides protec- tion from the spinning trimmer head.

OPERATING THE COUPLER

Your powerhead is equipped with a coupler which enables optional attach- ments to be installed. The optional at-

tachments	are:
Edger	71-79240
Cultivator	71-79241
Blower	71-79242
Pruner	71-79245

_. WARNING: Always disconnect

powerhead spark plug before remov- ing or installing attachments.

REMOVING BRUSHCUTTER AT-

TACHMENT (OR OTHER OPTIONAL ATTACHMENTS)

CAUTION: When removing or instal-

ling attachments, place the powerhead and attachment on a flat surface for

stability.

1= Loosen the coupler by turning the knob counterclockwise.

Upper Shaft

Coupler

LOOSEN

Attachment

TIGHTEiXKnob

Press and hold the locking/release button.

Locking/Release

Button ""-,.,_ _---._

Attachment

3, While securely holding the upper shaft, pull the attachment straight out of the coupler.

10