Bowers & Wilkins ASW500 owner manual Description

I5045

	ASW ™500
Description	Active vented-box subwoofer system
Drive units	One 250mm (10in) dia long-throw with pressed fibre
	cone and magnetic shielding
System frequency response	-3dB at 32Hz and 80Hz
Amplifier	Discrete MOSFET
	Power output:	70W continuous
	Input Impedance:	22kΩ
	Signal/Noise:	96dB
	Functions:	Input Level
		Phase 0º/180º
	Inputs:	Line In (RCA Phono)
		Speaker Level In (Spring Terminals)
	Outputs:	Line Out (RCA Phono)
		Link Out (RCA Phono)
		Speaker Level Out (Spring Terminals)
Low-Pass Filter	Active 2nd-order at 80Hz
High-Pass Filter	Line Level:	Passive 1st-order at 80Hz (47kΩ	load)
	Speaker Level:	Passive 1st-order at 80Hz into 8Ω	resistor
		(Response of passive filters
		dependent on load impedance)
Internal Volume	35 litres (1.24 cu ft)
Dimensions	Height:	415mm (16.3 in)
	Width:	353mm (13.9 in)
	Depth:	401mm (15.8 in)
Net Weight	12kg (26.5lb)
Finish	Cabinet:	Black Ash vinyl
	Grille:	Black

B&W Loudspeakers Ltd. reserves the right to amend details of the specification without notice in line with technical developments.

Copyright © B&W Loudspeakers Ltd. Printed in England.

B&W Loudspeakers Ltd, Meadow Road, Worthing, BN11 2RX Tel: +44 (0) 1903 524801 Fax: +44 (0) 1903 524725

http://www.bwspeakers.com