Sanyo SO-WIN-KF3AC, QXXAVC922---P Timer setting, How to set the timer, Set a day or date

Chapter 7 Controlling the projector

Timer setting

This page is to set the timer to turn the projector off or on at a programmed day/date and time. Follow the steps below for setting.

Click Timer on the main menu.

"---" will appear on the cur- rent time when the time is not set up correctly.

Present time set on the projector

Select date

Select day

Set execute time

Event action

How to set the timer

1Set a day or date

To set the timer event at the same time everyday or every week,

Select day entry with radio button and then select desired day from the pull-down menu button. The selectable days are as follows:

- Same time everyday - Every week (days from Monday to Sunday)

To set the timer event on specified date,

select date entry with radio button and then type the date with (Year/Month/Date) format.

Ex.: Type [2007/12/20] if you specify [December 20, 2007].

74

This projector does not provide the built-in battery. The date and time information are lost when the projector turns off (when "Eco" is set for the stand-by mode (Refer to p.72)), or the network configuration is reset, or the input mode "Wired" or "Wireless" is turned. The timer function is disable until time is set up correctly. When using the NTP address for time setting, the current time is acquired at the projector starting up and the timer function is activated after finishing the time setting correctly.