J.2Analysis and handling by Drive Log

Appendix J Maintenance of TOSHIBA RAID

J.2 Analysis and handling by Drive Log

Follow the below procedures to analyze.

Boot the independent utility and check the Physical Drive status.

(1)Which port of HDD failed?

Port 0

(2)If necessary, analyze the Drive Log and identify the cause of failure.

Replace the second HDD with new (good) one.

Port 1

(3) Does operation

No

miss cause it?

 

 

Yes

 

 

 

 

 

 

 

(2) If necessary, analyze the

(4) Change the status of the

 

Drive Log and identify

failed HDD to “OFFLINE”.

 

 

the cause of failure.

 

 

 

 

 

 

 

 

Replace the built-in HDD with the second HDD removed.

Replace the second HDD with new (good) one.

End

Figure J-2 Flowchart of Analysis and handling by Drive Log

J-2

[CONFIDENTIAL]

QOSMIO G20 Maintenance Manual (960-511)

Page 418
Image 418
Toshiba QOSMIO G20 manual Figure J-2 Flowchart of Analysis and handling by Drive Log