4 Replacement Procedures | 4.24 Speaker (R) |
4.24 Speaker (R)
Removing the speaker (R)
The following describes the procedure for removing the speaker (R) (See Figure
1.Pull out the
2.Draw the speaker (R) from the slot of cover assembly.
3.Disconnect the speaker (R) cable from the connector CN6003 on the system board.
Speaker (R)
Speaker (R) cable
CN6003
Figure 4-37 Removing the speaker (R)
Installing the speaker (R)
The following describes the procedure for installing the speaker (R) (See Figure
1.Connect the speaker (R) cable to the connector CN6003 on the system board.
2.Set the speaker (R) in the slot of cover assembly.
3.Install the
QOSMIO G20 Maintenance Manual | [CONFIDENTIAL] |