3.29 Wireless LAN Test Program | 3 Tests and Diagnostics | |||
Subtest02 | MAC Address Check |
| ||
| This subtest displays the MAC address. Selecting this subtest, following | |||
| message will appear in the display. |
| ||
| ************************************************************* | |||
| * | MAC Address Check : OK !! | * | |
| * | * | ||
| * |
|
| * |
| ************************************************************* | |||
| Press any key and return to the test menu. |
| ||
| When a defective is detected in the test, following typical cause is considered. | |||
|
| • | Connection of wireless LAN card |
|
|
| • | Defective wireless LAN card |
|
|
| • | Disappearance of MAC address data |
|
| Checking the connection, execute the subtest again. |
| ||
Subtest03 | Communication test of 11a mode (MB44ag) |
|
This subtest checks the connection and communication of wireless LAN antenna of Atheros 802.11a mode. Check the packet, throughput and RSSI and compare them with the standard.
After finishing the test, OK message will appear in the display. Press any key and return to the test menu.
When a defective is found during the test, NG message will appear in the display. Press any key and following message will appear in the display.
*************************************************************
* | 11a Communication Test : NG !! | * |
* | * | |
* | Please refer to log. txt | * |
* | * | |
* |
| * |
*************************************************************
Press any key and return to the test menu.
Open the log file (log.txt) and check the result.
[CONFIDENTIAL] | QOSMIO G20 Maintenance Manual |