Toshiba QOSMIO G20 manual Table J-3 Items displayed in Physical Drive

Appendix J Maintenance of TOSHIBA RAID J.3Operation of Independent utility

Physical Drive

In Physical Drive, the condition of RAID array is displayed by array. The following items are displayed.

	Table J-3 Items displayed in Physical Drive
		Explanation
Port		Displays the port number of Serial ATA connected to the drive.
Assign		Displays the array number and drive number of array that the drive
		is incorporated. The display format is LD [Array number]
		[Drive number]. For example, [LD0-1] means the disk drive 1 of
		Array 0.
Status		Displays the drive status. The followings are displayed.
		-ONLINE: The drive is working normally.
		-OFFLINE: The drive is not configured as array and is not used.
		-FAIL: The drive is failed and dose not work.
		-REBUILDING: The drive is been rebuilding by data of normal drive
		or the rebuilding is suspended.
		-UNKNOWN: There is controversy in the RAID information of other
		drive and the status is not decided. It is displayed when this drive
		was removed and used in the past. When this drive has been
		found good one, setting to OFFLINE is possible by executing
		[Force Offline].
Size		Displays the capacity of drive.
Model		Displays the model number of drive.
Rev		Displays the firmware revision of drive.
Progress		Displays the progress of rebuilding and Check media.

QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] J-11