4 Replacement Procedures | 4.7 Keyboard |
4.7Keyboard
Removing the keyboard
The following describes the procedure for removing the keyboard (See Figure
CAUTION: As the keytop may fall out, when handling the keyboard always hold it by the frame and do not touch the keytop.
1.Open the display.
2.Insert your finger into the slot between the keyboard brace and the computer. Then, lift up the keyboard brace to unlatch and remove it.
3.Remove the following screw securing the keyboard hold plate.
M2.0x4.0C | BIND screw | x1 |
4. Remove the following screws securing the keyboard.
M2.5x4.0B | FLAT BIND screw | x2 |
Keyboard hold plate
Keyboard brace
M2.0x4.0C BIND M2.5x4.0B FLAT BIND
M2.5x4.0B FLAT BIND
Figure 4-9 Removing the keyboard hold plate
QOSMIO G20 Maintenance Manual | [CONFIDENTIAL] |
