3.31 Sound Test program | 3 Tests and Diagnostics | |
Subtest02 | Sine Wave |
|
| This subtest is executed by loading the COM file (ADSIN.COM). The | |
| program expands sine wave data table from 16KB to 64KB, and creates the | |
| play data. Then it transfers the data between the DMA and the CODEC to | |
| play the sine wave. (It sounds like a continuous beep). By using wave | |
| measurable devices such as an oscilloscope, the data can be measured as a | |
| sine wave. |
|
| When the subtest is executed, the sine wave is played while expanding sine | |
| wave from 16KB to 64KB. |
|
| The display returns to the Sound (Standard) test menu after the test ends. | |
Subtest03 | Line IN recording & play |
|
| This subtest executes the same test as the subtest01 by recorded sound from | |
| the different port |
|
For more details on the subtest, refer to the subtest01 Microphone recording & play.
The display returns to the Sound (Standard) test menu after the test ends.
3.31.2 Sound (Legacy) test
To execute the Sound (Legacy) test, select 2 and press Enter.
CAUTION: Sound (Legacy) test is not supported in this model.
[CONFIDENTIAL] | QOSMIO G20 Maintenance Manual |
