Toshiba QOSMIO G20 manual Latch assembly Replacement Procedures, Removing the latch assembly

4.32 Latch assembly 4 Replacement Procedures

4.32Latch assembly

Removing the latch assembly

The following describes the procedure for removing the latch assembly (See Figure 4-45).

1. Remove the following screws securing the latch assembly.

‰ M2.5x4.0B FLAT BIND screw x2

2.Pull up and remove the latch assembly.

3.Releasing hooks of latch assembly, disassemble the latch slider and spring.

M2.5x4.0B FLAT BIND

Latch assembly

Latch slider

Spring

Figure 4-45 Removing the latch assembly

4-72 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)