Appendix J
Appendix J Maintenance of TOSHIBA RAID

J.1 Outline of Maintenance (Repair) of TOSHIBA RAID

Follow the below procedures to repair TOSHIBA RAID
No
Yes
Analysis by Drive Log (*3)
Is it needed to
specify the cause?
Treatment
No
Perform the HDD Trouble-
shooting Procedure in
Section 2.6.
Yes
Identify the failed HDD (*2)
Is the RAID configured
by two HDD?
Reception
Figure J-1 Flowchart of repairing TOSHIBA RAID
*1: Refer to “Check of RAID configuration” in Section 3.2 in Chapter 3.
*2: Refer to “Identifying failed HDD” in Section 3.3.3 of Chapter 3.
*3: Refer to “Analysis by Drive Log” in section J.2.
QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] J-1