Toshiba QOSMIO G20 manual Create Array, Start Rebuild Resume Rebuild, Modify Array, Media Check

J.3Operation of Independent utility Appendix J Maintenance of TOSHIBA RAID

(3) Explanation of Main Menu

The Independent Utility has following Main Menu.

	Table J-4 Item of Main Menu displayed
	Explanation
Create Array	Builds RAID array.
Start Rebuild	Rebuilds RAID-1. While the rebuild is suspended, the message of
	“Resume Rebuild” is displayed.
Check Media	Checks if any error in drives configuring array. This is available for
	the RAID-1 in the “Optimal” condition.
Modify Array	Changes the setting of array.
Delete Array	Delete array.
Physical Drive	Changes the setting of physical drive.
Exit	Exits from the utility.

CAUTION: Do not use the following item of the Independent Utility for maintenance.

[Create Array]

This changes the current RAID configuration or information, and delete user’s data. Do not use for maintenance.

[Start Rebuild (Resume Rebuild)]

This changes the current RAID configuration or information, and delete user’s data. Do not use for maintenance.

[Modify Array]

This changes the current RAID configuration or information, and delete user’s data. Do not use for maintenance.

[Media Check]

This changes the current RAID configuration or information, and delete user’s data. Do not use for maintenance.

[Delete Array]

This changes the current RAID configuration or information, and delete user’s data. Do not use for maintenance.

J-12 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)