Toshiba QOSMIO G20 manual Replacement Procedures Power SW board, Installing the Power SW board

4 Replacement Procedures 4.16 Power SW board

Installing the Power SW board

The following describes the procedure for installing the Power SW board (See Figure 4-26).

1.Connect the Power SW harness to the connector CN9622 on the Power SW board.

2.Install the Power SW board to the cover assembly and secure it with the following screw.

‰ M2.5x4.0B FLAT BIND screw x1

QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 4-45