4 Replacement Procedures | 4.29 Volume sensor board |
4.29 Volume sensor board
Removing the volume sensor board
The following describes the procedure for removing the volume sensor board (See Figure 4- 42).
1.Remove the following screws securing the volume sensor holder and remove the volume sensor holder.
M2.5x2.8B FLAT BIND screw | x2 |
2.Draw the volume harness from the guide of cover assembly and remove the volume sensor board from the cover assembly.
M2.5x2.8B FLAT BIND
Volume harness
Volume sensor holder
Volume sensor board
Figure 4-42 Removing the volume sensor board
Installing the volume sensor board
The following describes the procedure for installing the volume sensor board (See Figure 4- 42).
1.Arranging the volume harness along the guide of cover assembly, install the volume sensor board.
2.Install volume sensor holder and secure it with the following screws.
M2.5x2.8B FLAT BIND screw | x2 |
QOSMIO G20 Maintenance Manual | [CONFIDENTIAL] |
