Toshiba QOSMIO G20 manual Replacement Procedures Memory module, Removing a memory module

4 Replacement Procedures 4.6 Memory module

4.6Memory module

CAUTION: The power of the computer must be turned off when you remove a memory module. Removing a memory module with the power on risks damaging the module or the computer itself.

Do not touch memory module terminals. Any dirt on the terminals may cause memory access problems.

Never press hard or bend a memory module.

Removing a memory module

To remove a memory module, confirm that the computer is in boot mode. Then perform the following procedure (See Figure 4-8).

1.Turn the screw (with e-ring) securing the memory slot cover.

2.Remove the memory slot cover.

3.Open the left and right latches and remove a memory module.

Memory slot cover Screw (with e-ring)

Memory module

Figure 4-8 Removing a memory module

QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 4-19