3 Tests and Diagnostics | 3.32 SETUP |
NOTE: When starting the computer in Standby or Hibernation, the last configuration is remembered. If data does not appear on the display you are using after starting in Standby or Hibernation, pressing Fn+F5.
Pressing Fn+F5 changes the display setting as follows in order: the internal LCD, the external display, both the internal LCD and the external display.
When an external display, which does not support SVGA mode is connected and “LCD+AnalogRGB” is selected, the external display is not displayed.
(b)LCD Display Stretch
LCD Display Stretch enables or disables a larger display area of the screen.
Enabled | Enables the LCD display stretch feature. (Default) |
Disabled | Disables the LCD display stretch feature. |
(c)TV Type
This option allows you to select the type of TV.
NTSC (Japan) | TV in Japanese system | |
NTSC (US) | TV in the U.S. system | |
PAL | TV in Europe and China system | |
525p | (480p,D2) | High Definition Television with 480 progressive scan |
750p | (720p,D4) | High Definition Television with 720 progressive scan |
1125i | (1080i,D3) | High Definition Television with 1080 interlace |
525i | (480i,D1) | High Definition Television with 480 interlace |
PAL | (SCART) | TV in Europe system |
11.Peripheral
Use this option to select the peripheral's mode.
(a)Internal Pointing Device
This option enables or disables the touch pad
Enabled | Enables the touch pad. (Default) |
Disabled | Disables the touch pad. |
QOSMIO G20 Maintenance Manual | [CONFIDENTIAL] |
