Toshiba QOSMIO G20 manual MDC Replacement Procedures, Installing a MDC

4.5 MDC 4 Replacement Procedures

Installing a MDC

The following describes the procedure for installing a MDC (See Figure 4-7).

1.Connect the RJ11 harness to the connector of the MDC.

2.Install a MDC and connect it to the connector CN3000 on the SD board.

3.Secure the MDC with the following screws.

‰ M2.0x4.0C BIND screw x2

4-18 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)