Toshiba QOSMIO G20 manual PCI ExpressCard Slot Troubleshooting, Gigabit Ether ExpressCard

2.18 PCI ExpressCard Slot Troubleshooting 2 Troubleshooting Procedures

2.18 PCI ExpressCard Slot Troubleshooting

This section describes how to check PCI ExpressCard slot by inspecting a card with PCI Express interface and a card with USB 2.0 interface.

1.Gigabit Ether ExpressCard

2.USB2.0 5in1 ExpressCard

1.Gigabit Ether ExpressCard

(1)Insert the Gigabit Ether ExpressCard into the ExpressCard slot.

(2)On Windows, open System Property → Hardware → Device Manager window.

(3)Make sure that the following device is recognized on the Device Manager window.

Marvell Yukon 88E8053E PCI-E Gigabit Ethernet Controller #2

(“#2” is displayed in the PC with a built-in LAN of Gigabit, because the controller is the same one. “#2” is not displayed in the PC with a built-in LAN of

10/100 Megabit.)

(4)After confirmation, take a “Safety Remove” procedure and pull out the Gigabit Ether ExpressCard

2.USB2.0 5in1 ExpressCard

(1)Insert the USB2.0 5in1 ExpressCard into the ExpressCard slot.

(2)On Windows, open System Property →Hardware → Device Manager window.

(3)Make sure that the following device is recognized on the Device Manager window.

USB 2.0 5in1 ExpressCard USB Device

(4)After confirmation, take a “Safety Remove” procedure and pull out the USB2.0 5in1 ExpressCard.

2-68 QOSMIO G20 Maintenance Manual (960-511)