Appendix J Maintenance of TOSHIBA RAID | J.3Operation of Independent utility |
Change RAID Level
To change RAID level, select [Modify Array] menu. When changing
Changing RAID-1 to RAID-0 working by one drive
When changing
1.Select [Modify Array] in [Main Menu].
2.In [Modify Array], select array [LDx] that you want to change.
3.In [Modify Array], select
4.In [Physical Drive] select one drive, which is used as
5.After selecting a drive, press [Enter] key. When [Confirmation] is displayed, select “OK” to store the setting.
Changing RAID-0 working by one drive to RAID-1
To change
1.Select [Modify Array] in [Main Menu].
2.In [Modify Array], select array [LDx] that you want to change.
3.In [Modify Array], select
4.Select a drive in the condition of [OFFLINE] in [Physical Drive], which is expanded as
5.After selecting a drive, press [Enter] key. When [Confirmation] is displayed, select “OK” to store the setting.
6.Select [Resume Rebuild] in [Main Menu], or select [Exit] to exit from Independent Utility. When automatic rebuilding is set in OS, rebuilding starts automatically after booting OS.
7.During rebuilding, the progress is displayed in [Physical Drive]. Suspending or aborting is possible.
8.When the rebuilding is completed, message is displayed, the select “OK”.
QOSMIO G20 Maintenance Manual | [CONFIDENTIAL] |
