Toshiba QOSMIO G20 manual Mdc, Replacement Procedures MDC, Removing a MDC

4 Replacement Procedures 4.5 MDC

4.5MDC

Removing a MDC

The following describes the procedure for removing a MDC (See Figure 4-7).

1. Turning up the insulator, remove the following screws securing a MDC.

‰ M2.0x4.0C BIND screw x2

2.Pull a MDC straight up and disconnect the MDC from the connector CN3000 on the SD board.

3.Disconnect the RJ11 harness from the MDC.

M2.0x4.0C BIND

Insulator

CN3000

MDC

RJ11 harness

Figure 4-7 Removing a MDC

QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 4-17