4 Replacement Procedures

4.34 LCD harness

Installing the LCD harness

The following describes the procedure for installing the LCD harness (See Figure 4-50 and 4- 52).

1.Arrange the LCD harness by putting the harness through the slot of display assembly.

2.Install the LCD harness holder (display rear cover side) to the display rear cover and secure it with the following screw.

‰ M2.5x4.0B FLAT BIND screw

x1

3.Installing the hinge front cap (L) while hooking the tabs, install the hinge rear cap

(L) and secure it with the following screw.

‰ M2.0x4.0B FLAT BIND screw

x1

4.Install the LCD harness holder (cover assembly side) while holding the LCD harness and secure it with the following screw.

‰ M2.5x4.0B FLAT BIND screw

x1

QOSMIO G20 Maintenance Manual (960-511)

[CONFIDENTIAL]

4-81

Page 323
Image 323
Toshiba QOSMIO G20 manual Installing the LCD harness