
4.16 Power SW board | 4 Replacement Procedures |
4.16Power SW board
Removing the Power SW board
The following describes the procedure for removing the Power SW board (See Figure
1.Remove the following screw securing the power SW board and pull up the Power SW board from the cover assembly.
M2.5x4.0B FLAT BIND screw | x1 |
2.Disconnect the Power SW harness from the connector CN9622 on the Power SW board.
Power SW board
M2.5x4.0B FLAT BIND
Power SW harness
CN9622
Figure 4-26 Removing the Power SW board
[CONFIDENTIAL] | QOSMIO G20 Maintenance Manual |