Toshiba QOSMIO G20 manual CD Sound Legacy test

3 Tests and Diagnostics 3.31 Sound Test program

(2) Audio CD

Insert an audio CD and the following menu appears in the display.

CD/DVD TEST IN PROGRESS XXXXXXXX

xxxxxxxDIAGNOSTIC TEST VX.XX [Ctrl]+[Break] ; test end

[Ctrl]+[C] ; key stop

SUB-TEST	: XX	ERROR COUNT: XXXXX
PASS COUNT : XXXXX
WRITE DATA	: XX	READ DATA	: XX
ADDRESS	: XXXXXX	STATUS	: XXX

CD Sound track number (01-98 : Track)	?
Drive #	= 0, ATAPI status =00
Command	= XX	=	XXXXXXXX]]
[[Block	address
[[Block	length	=	XXXXXXXX]]

Final : Block address = XXXXXXXXX

Select the track number you want to test and press Enter twice.

The following message appears in the display and selected track is played.

Play start CD sound !

Press any key <play stop>

After pressing any key, the music stops and the display returns to the selection menu of the track number.

NOTE: When the CD-ROM test is executed, [ALL DEVICE] must be selected in the “Device Config.=” of the BIOS SETUP. If the “ALL DEVICE” is not selected, music can not be played.

3.31.4 CD Sound (Legacy) test

To execute the CD Sound (Legacy) test, select 4 and press Enter.

CAUTION: Sound (Legacy) test is not supported in this model.

QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 3-101