3.3 Check of the RAID configuration | 3 Tests and Diagnostics |
NO DRIVE for one drive is displayed
When “NO DORIVE” is displayed and the HDD is connected to the port, follow the procedures below to check the HDD failure.
(1)Install a new HDD.
When “NO DORIVE” is still displayed, It is judged that the MB or cable fails.
(2)When a new HDD is recognized, It is judged that the HDD removed is failed. Specify the reason by using the Independent Utility.
TOSHIBA RAID / RAID Information Display | Rev xx.xx.xxxx | |||
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved. | ||||
Level | Status | Capacity |
| |
LD0 | DEGRADE | xxGB |
| |
Write cache | : Enable |
| ||
Degrade Bootup | : Yes |
|
| |
MBR Protection | : Disable |
| ||
S.M.A.R.T | : Enable |
| ||
Port Assign Status | Size | Model | Rev | |
0 | ONLINE | xxGB | ||
1NODRIVE xxGB
<RAID: not OPTIMAL >
[CONFIDENTIAL] | QOSMIO G20 Maintenance Manual |
