How to Check and Clear Hose |
| ||
Blockages (Continued) |
|
| |
2. | Remove handle. | 2 |
|
3. | Disconnect hose. |
| |
|
| ||
| 4 |
| 3 |
|
|
| |
How to Check and Clear Blockages in Base
1.Remove the attachment hose from the lower hose retainer and look into the hose retainer for any obstructions. Proceed to Step 2 to check for any other blockages.
2. Remove the hood by loosening the two screws located on the top of the hood and lifting upward.
3. Step on the handle release and lower the handle all the way to the floor.
4.Reinstall the hose and handle.
HEPA Cartridge Filters (Only for models with HEPA cartridge.) Check the HEPA filters with each disposable dust bag change. Replace twice a year or after every six bag changes.
Latch
Filter Cartridge (One complete unit)
4.Check for blockages in the brush roll area and remove any obstructions found there. The base hose can be cleared of any blockage by using a blunt instrument.
5.After the blockage is removed, replace the hood and tighten the two hood screws (see Fig. 2). Raise the handle to the upright position (see Fig. 3) and replace the hose into the lower hose retainer.
HEPA/Micron Filters in Filter Frame (Only for models with HEPA/Micron filter frame)
Tabs To remove HEPA cartridge filters
1.Push down latch and pull filter cassette back.
2.Then lift filter up and remove.
To replace HEPA cartridge filters
Check the HEPA/Micron filter with each disposable dust bag change. Replace twice a year or after every six bag changes.
Filter Frame plus filter (depending on your vacuum model)
Filter | Filter | |
Frame | ||
|
1.Place bottom tabs of filter cassette into slots.
2.Rotate filter toward cleaner.
3.Push upward on the latch to secure into place.
NOTE: To have the benefit of a sealed HEPA system, you must use one of the HEPA cartridge filter systems.
To remove HEPA/Micron filters from filter frame.
1.Push down latch and pull filter frame back.
2.Then lift filter up and out of filter frame.
To replace HEPA/Micron filters into filter frame.
1.Place new filter in filter frame. Place bottom tabs of filter frame into slots.
2.Rotate filter frame toward cleaner.
3.Push upward on the latch to secure into place.
9
