Eureka 4440-4470 Series, 4320-4370 Series manual HOW to Maintain

HOW TO MAINTAIN (continued)

How To Change Light Bulb (only for models with a headlight)

NOTE: Turn off the power switch and disconnect the electrical cord before changing light bulb.

1.Lower handle. Remove two screws from lens cover.

2.Pull lens cover from cleaner.

3.	Pull light bulb and socket toward front.	4
4.	Push light bulb into socket; turn to release.
5.	Place new light bulb into socket; turn to secure.
6.	Push light bulb and socket back so bulb will not touch lens		5
	cover.

7.Replace lens cover.

8.Secure with two screws.

Use 15 watt replacement light bulb, part number 48815.

Problem Solving NOTE: Turn off the switch and unplug electrical cord before servicing.

		PROBLEM�	CAUSE�	SOLUTION
Motor will not start			Electric Plug	Push plug securely into outlet.
				Try another outlet.
				Check circuit breaker.
Motor suddenly			Thermal Cut Off	Refer to page 3 & 5.
stops
Does not clean the			Disposable Dust Bag and Filter(s)	Change the bag. Hint: If picking up fine dust, the bag may not
carpet or floor.				look full, but a fine substance tends to reduce suction when it
				blocks the airflow through the paper bag and filter(s). Make sure
				the dust bag is installed properly. Make sure bag cover is
				installed properly.
			Belt	Replace a cut, loose or out of shape belt.
			Brush Roll	Clean hair and thread from bristles and end cap area.
				Replace brush roll if bristles are worn.
			Hose	Remove any clogs from the hose that restrict the airflow.
No suction at the			Disposable Dust Bag	Change the bag. Hint: If picking up fine dust, the bag may not
end of the hose.				look full, but a fine substance tends to reduce suction when it
				blocks the airflow through the paper bag.
			Hose	Remove any clogs from the hose that restrict the airflow.
				Check both ends of the hose. (See pages 13-14)
	Headlight not		Light Bulb	Replace light bulb.
working.
Noise from the			Brush Roll	Remove hood and clean debris from the brush roll area.
brush roll area.
			Belt	Replace a cut, loose or out of shape belt.
Cleaner is hard to			Cleaner Height Setting	Turn adjustment knob to a higher position. Hint: Put handle in
push.				operating position. Tilt the cleaner back to raise the front wheels
				off floor. Then turn the knob.
			Belt	Replace a cut, loose and out of shape belt.
Brush roll will	Belt	Replace cut, loose or out of shape belt.
not turn.
		Burning smell.	Belt	Replace cut, loose or out of shape belt.
Cleaning height			Cleaner Height Setting	Hint: Put handle in operating position. Tilt the cleaner back to
knob will not turn.				raise the front wheels off floor. Then turn the knob.
Missing parts.				Call 1-800-438-7352 between 8:00 a.m. and 4:45 p.m., central
				standard time, Monday through Friday. Know the model and
				serial numbers when you call.
		Questions?		Call 1-800-282-2886 8 a.m. to 7:30p.m., (CST), Monday -
				Friday and 10 a.m. to 6:30 p.m. (CST) Saturday. Know the
				model and serial numbers when you call.	11