Toshiba QOSMIO G20 manual Debug port Boot mode error status 6/8, Pciconfiguration

2.4 System Board Troubleshooting 2 Troubleshooting Procedures

Table 2-4 Debug port (Boot mode) error status (6/8)

D port status	Inspection items	Details
(F109h)		Configuration
		Saving of VGA configuration result
F10Ah	Task generation for waiting
	PCI_CONFIGURATION
	completion
	Initialization of H/W needed	HDD initialization sequence start
	after PCI configuration
	Enabling power off
	Output code generation
F10Bh	FIRST_64KB_CHECK	(Check of first 64KB memory)
F10Ch	INIT_INT_VECTOR	(Initialization of vectors)
F10Dh	INIT_NDP	(Initialization of NDP)
F10Eh	INIT_SYSTEM	Storing of CMOS error status to
	(Initialization of system)	IRT_ERR_STS_BUF
		Timer initialization start
		EC initialization & Reading of battery
		information
		Update of system BIOS (Update of EDID
		information for LCD)
F10Fh	INIT_DISPLAY	Waiting for VGA chip initialization completion,
		VGA BIOS initialization
		Waiting for VGA power ON
		Waiting for Display access completion
F110h	Calling VGA BIOS
F112h	DISP_LOGO	Displaying logo
F113h	SYS_MEM_CHECK	Check of convention memory in the protected
		mode (boot)
F114h	EXT_MEM_CHECK	Check of exception in the protected mode
		(boot)
F115h	Check of exception in the	DPORT= F116H when error
	protected mode
	INIT_SYS_MEM	Initialization of conventional memory (Reboot)

2-26 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)