Toshiba QOSMIO G20 manual Replacement Procedures Latch assembly, Installing the latch assembly

4 Replacement Procedures 4.32 Latch assembly

Installing the latch assembly

The following describes the procedure for installing the latch assembly (See Figure 4-45).

1.Assembling the spring and latch slider, fit the hooks of latch slider into the latch assembly.

2.Install the latch assembly to the cover assembly and secure it with the following screws.

‰ M2.5x4.0B FLAT BIND screw x2

QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 4-73