Brother CM100DM operation manual Adjusting the Screen, FAfter cleaning, perform a test scan, Notch

dDampen a soft lint-free cloth with water and firmly wring it out, and then wipe the scanner glass at the inside on the bottom of the machine.

eFit the tab on the cover into the notch of the installation slot, and then attach the cover to the machine.

a

aNotch

fAfter cleaning, perform a test scan.

Adjusting the Screen

If the screen does not respond correctly when you touch a key (the machine does not perform the operation or performs a different operation), follow the steps below to make the proper adjustments.

aHolding your finger on the LCD screen, turn the main power to off and back to on.

XThe touch panel adjustment screen is displayed.

bUsing the included touch pen, lightly touch the center of each +, in order from 1 to 5.

XAfter completing the touch panel adjustment, the message “SUCCESS” appears on the screen.

cTurn the main power to off, then turn it back to on.

Note

•If you finish the screen adjustment and the screen still does not respond correctly, or if you cannot do the adjustment, contact the retailer who sold you this machine or the nearest authorized service center.

60