Brother CM100DM operation manual Medium Weight Paper, Lightweight Fabric for Quilt Piecing

Note

•Place the material within the attaching area (grid area) on the adhesive side. If the material extends from the attaching area, it may be damaged by the feed rollers when the mat is fed.

Memo

•The mat does not have a top and bottom. It can be inserted into the feed slot from either end.

■2 Medium Weight Paper

a

d

b

c

1

dFirmly attach all of the material to the mat so that there are no wrinkles and no part can curl off.

•Otherwise, curls in the material may become caught when the mat is inserted.

Note

•If the mat is dirty, clean it. For details, see “Cleaning the Mat” on page 58.

Peeling Off the Material (Lightweight Paper) Follow the steps in adjusting the blade extension (page 18), installing the blade holder (page 19) and trial cutting (page 19) to set up your machine. After cutting the material, use a spatula to slowly peel off the paper.

aStandard cut blade

bStandard cut blade holder (turquoise)

cStandard mat (turquoise and purple)

dLow tack adhesive mat (turquoise) (When cutting slick paper)

Attaching the Material (Medium Weight Paper) Follow the steps in “Attaching the Material (Lightweight Paper)” on page 12.

Peeling Off the Material (Medium Weight Paper) Follow the instructions in “Peeling Off the Material (Lightweight Paper)” on page 13.

■3 Lightweight Fabric for Quilt Piecing

a

d

b

c

aStandard cut blade

bStandard cut blade holder (turquoise)

cStandard mat (turquoise and purple)

dHigh tack adhesive fabric support sheet (light blue backing)

Attaching the Material (Lightweight Fabric for Quilt Piecing)

Use the specially designed adhesive sheet to attach lightweight fabrics for quilt piecing to the standard mat. The high-tack adhesive fabric support sheet is perfect for quilt piecing since it will not leave adhesive on the surface of fabric. Support sheets can be repeatedly used unless they are peeled off the mat. They should only be used with patterns that have a seam allowance. When cutting patterns without a seam allowance, use the iron-on fabric appliqué contact sheet.

13