Brother CM100DM operation manual Recall from the machine’s memory, Recall from a USB flash drive

bTouch the desired destination, and then select the desired pattern.

•To recall data from a USB flash drive, plug the USB flash drive into the USB port on this machine.

ab

aRecall from the machine’s memory.

XTouch the pattern to be recalled and display a preview of the pattern layout.

bRecall from a USB flash drive.

XIf there are folders on the USB flash drive, touch a folder to display the list of patterns that it

contains.

•If there are many folders or patterns, touch the arrows keys in the screen to scroll up or down.

Note

•If the name of the data file/folder cannot be identified, for example, when the name contains special characters, the file/folder is not displayed. If this occurs, change the name of the file/folder. We recommend using the 26 letters of the alphabet (uppercase and lowercase), the numbers 0 through 9, “-” and “_”.

XTouch the pattern to be recalled and display a preview of the pattern layout.

cCheck the preview of the pattern layout in the screen, and then touch the “OK” key.

a

b

dc

aTouch to return to the list of patterns at the destination.

bTouch to delete the data for the displayed pattern layout.

cTouch to recall the pattern layout data.

dTouch to display the patterns enlarged.

Memo

•Even if a seam allowance has been saved with the pattern(s) (see “Cutting Around Drawings” on page 44), the “Seam Allowance” setting specified in the settings screen will have priority and will be applied. If necessary, adjust the “Seam Allowance” setting in the settings screen (see “Seam Allowance” on page 24).

42