Brother CM100DM operation manual Selecting the Test Pattern, Loading the Mat, Guides Feed rollers

■Selecting the Test Pattern

Cut out a test pattern from paper.

Memo

•The language setting can be specified in the settings screen (see “Language” on page 23).

aSelect “Pattern” in the home screen.

bTouch the “Test” key in the pattern category selection screen.

cSelect a pattern in the pattern selection screen.

•We recommend using pattern “T-02” when cutting paper and pattern “T-03” when cutting fabric.

dTouch the “Set” key.

eCheck the pattern arrangement, and then touch the “OK” key.

•For details on changing the pattern arrangement, see “Pattern Layout Screen” on page 35.

•Press to cancel the pattern selection, and then select the pattern again.

■Loading the Mat

aAttach the material that will be cut to the mat.

•For details on attaching material to the mat, see “Mat and Cutting Blade Combinations” on page 12.

bWhile holding the mat level and lightly

inserting it into the feed slot, press in the operation panel.

Lightly insert the mat so that it aligns with the guides on the left and right sides of the feed slot and is tucked under the feed rollers.

b	b
a	a
a Guides
b Feed rollers

XThe mat is fed in to complete the preparations for cutting.

20