Brother CM100DM operation manual Cleaning the Scanner Glass, Cleaning Inside the Machine

■Cleaning Inside the Machine

If there are vertical lines or blank areas in the scanned image, lint or dust may have accumulated in the machine. The Lint may also attach to the surface of the feed rollers, preventing a mat to be loaded or unloaded correctly. Use a soft brush to clean it.

aTurn off the machine and disconnect the power cord plug, and then disconnect the AC adapter plug from the DC power jack on the back of the machine.

bOpen the cover on the front of the machine.

cRemove the holder from the carriage.

dUse a commercially available brush to clean around the feed slot and the carriage.

Cleaning the Scanner Glass

If there are unwanted vertical lines in the scanned image or if scanning cannot be done cleanly, the scanning area of the scanner may have become dirty. Clean the scanner glass at the bottom of the machine.

aTurn off the machine and disconnect the power cord plug, and then disconnect the AC adapter plug from the DC power jack on the back of the machine.

5

bStore away the operation panel.

First raise the panel until it is vertical, and then lower and store it away.

a b

cWhile pushing in the tab at the bottom of the machine, pull up on the cover.

59