Brother CM100DM operation manual Basic Operations, Pattern Cutting, Tutorial 1 Cutting Patterns

Chapter 2 BASIC OPERATIONS

PATTERN CUTTING

The following procedures use built-in patterns to describe the entire series of operations, from selecting a pattern and editing it to cutting.

Tutorial 1 - Cutting Patterns

In this tutorial, we will cut two built-in patterns.

■Turning On the Machine

Press to turn on the machine.

•For details, see “Turning On/Off the Machine” on page 10.

■Setting the Holder

Install the cutting blade holder into the carriage of the machine.

•For details, see “Installing and Uninstalling the Holder” on page 19.

■Selecting and Editing the First Pattern

aSelect “Pattern” in the home screen.

bSelect the category for the pattern to be cut out in the pattern category selection screen.

For this example, select . 2

a

b

aTouch to return to the previous screen.

bPattern categories

Memo

•The pattern categories and built-in patterns that appear in the operation screens differ depending on the machine model. For details on the built-in patterns, refer to the included pattern list.

cSelect the first pattern to be used in the pattern selection screen.

a

b

aTouch to scroll up.

bTouch to scroll down.

dEdit the pattern using the pattern editing screen.

After editing is finished, touch the “Set” key.

•For details on the editing functions, see “Pattern Editing Functions” on page 33.

25