Brother CM100DM Editing Cutting Lines, EPress the Start/Stop button to start scanning

Memo

•In “Direct Cut” mode, the optional 12" × 24" (305 mm × 610 mm) mat and scanning mat cannot be used.

•Before attaching the material to the mat, use a corner of the adhesive side of the mat to test attaching it.

dWhile holding the mat level and lightly inserting it under the feed rollers on the left and

right sides of the feed slot, press in the operation panel.

• For details, see “Loading the Mat” on page 20.

XThe “Start/Stop” button in the operation panel lights up.

ePress the “Start/Stop” button to start scanning.

XWhen scanning is finished, the scanned image appears in the screen.

fCheck the scanned image, and then touch the “OK” key.

■Editing Cutting Lines

aIn the image trim screen, use the touch pen to

touch and drag it around the screen to trim the image.

bTo cut around the image for the pattern, touch the “OK” key.

•Touch to cut any of a variety of shapes as a frame around the scanned image. For details on selecting a frame, see “Advanced Cutting Functions” on page 49.

■Cutting

aTouch the “Cut” key.

XThe “Cut” key is highlighted, and the “Start/Stop” button in the operation panel lights up.

bPress the “Start/Stop” button to start cutting.

•For details on unloading the mat after cutting, follow the procedure under “Unloading the Mat” on page 21.

48