One for All URC-9964B00 manual Adjusting the Display, Adjusting Brightness, Program Keys appear

OFA Kameleon wRF UG rev 3.fm Page 13 Monday, September 13, 2004 11:18 AM

USER’S GUIDE

ADJUSTING THE DISPLAY

Your new remote has several ways to adjust the display for your comfort and best use.

ADJUSTING BRIGHTNESS

The OFA Kameleon 8-Device Remote with RF has five levels of brightness adjustment and is set to the middle one at the factory. To increase or decrease the brightness, perform the following steps:

NOTE: Increasing the brightness of the display can decrease battery life.

1.Press and hold SETUP until the two bottom IR segments flash twice. The

Program Keys appear.

NOTE: . If the display turns off because of inactivity, you must start the programming sequence again by repeating this step.

2.Press (Brightness) once.The Brightness programming screen appears:

•To increase brightness, press

one or more times.

• To decrease brightness, press￿ one or more times.

3. When the desired brightness is achieved, press HOME twice to exit programming and return to the last- selected device menu screen.

NOTE: Otherwise, to program other features, press HOME only once to return to the Program Keys.

Adjusting The Display 13