OFA Kameleon wRF UG rev 3.fm Page 16 Monday, September 13, 2004 11:18 AM
KAMELEON 8-DEVICE REMOTE WITH RF
To control devices other than the default brands, perform the following steps; otherwise skip this section.
NOTE: . To control a Combo device, perform the instructions in “Programming DVD Player/VCR Combo Control” on page 17.
1.Turn on a device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc).
NOTE: Read steps 2 through 9 completely before proceeding. Before starting step 2, review the “Manufacturer’s Codes” (starting on page 42). Brands are listed alphabetically in order of most popular ones first. Highlight or write down the devices and the codes you wish to program.
1.Press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear as SETUP flashes repeatedly
NOTE: . If the display turns off due to inactivity, the remote control exits programming and return to the
2.Press DEV SET once. The Device Setup programming screen appears:
3.Press a device key once (i.e., AUX, CBL/
SAT, CD, TV, DVD, AUDIO, VCR, or PVR).
The selected device key animates.
NOTE: Refer to the Device Table on page 12 when choosing a device key for programming.
4. Use the Manufacturer’s Codes (starting on page 42) to locate the type of device and brand name and then use the Number Keys to enter the first code for your device. The bottom two IR segments flash twice.
NOTE: If the bottom two IR segments displayed one long flash, a mistake has occurred. Try entering the code again.
16 |
|
| Programming Device Control | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
