One for All URC-9964B00 manual Power Cord Antenna IR Lens, Adding the IR Signal Extension Cord

OFA Kameleon wRF UG rev 3.fm Page 25 Monday, September 13, 2004 11:18 AM

USER’S GUIDE

2.Plug in the IR/RF Base Station's power cord to the base station and to the wall plug, as shown in the image to the right:

3.Position the IR/RF Base Station so the black IR Lens is aimed at your home theater devices, as shown to the right:

4.To test the IR/RF Base Station, take the OFA Kameleon 8-Device Remote with RF into another room in your home or up to 100 feet away in an open range. Select a device key (e.g., TV) and press it once.Then press POWER once. The device (e.g., TV) should turn on.

Power Cord

Antenna

IR Lens

If it does not turn on, review the steps 1 through 3 and make any adjustments. Try step 4 again. If you continue to have a problem, perhaps there is an IR line-of sight problem. Try adding the enclosed IR Signal Extension Cord (see“Adding the IR Signal Extension Cord” on page 25). Also review the tips in “Optimizing IR/RF Base Station Reception” on page 27.

ADDING THE IR SIGNAL EXTENSION CORD

Included with the OFA Kameleon 8-Device Remote with RF package is an IR Signal Extension Cord for use with a home theater device that is not in direct line-of-sight of the IR/RF Base Station.

Using the IR/RF Base Station 25