OFA Kameleon wRF UG rev 3.fm Page 31 Monday, September 13, 2004 11:18 AM
USER’S GUIDE
5.To save the macro, press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear again.
6.Exit programming by pressing HOME once. The display returns to the
7.Now, if you aim the remote control at the devices selected in step 4 and press the programmed Macro Key once, the TV turns on and tunes to channel 3. Then the Cable Box turns on and tunes to channel 071.
PROGRAMMING A MASTER POWER MACRO IN THE HOME THEATER MODE
A macro can be programmed onto the POWER key to turn on or off as many as seven Home Theater devices.
NOTE: This following example assumes the Home Theater system contains a Satellite Receiver, a DVD Player, an Audio Receiver, and a TV.
1.Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys appear as SETUP flashes repeatedly.
2.Press MACRO once.The Macro programming screen appears:
3.Press POWER once.The
device menu screen, including HOME, appears.
4. Enter the macro sequence. For this example, press CBL/SAT once, followed by POWER once. Next, press DVD once, followed by POWER once.Then press AUDIO once, followed by POWER once. Finally, press TV once, followed by POWER once.
5.To save the power macro, press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear again.
6.Exit programming by pressing HOME once. The display returns to the
7.To test the power macro, first make sure all home theater devices selected in step 4 are turned on. Aim the remote control at the devices
| Using Macros | 31 |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
