OFA Kameleon wRF UG rev 3.fm Page 30 Monday, September 13, 2004 11:18 AM
KAMELEON 8-DEVICE REMOTE WITH RF
A macro can be used to control a home theater operation, to set a favorite channel, or for other multiple functions you would like to control with one key press. Moreover, each Macro Key can hold up to 15 key presses total.
NOTE: Programming a new macro over an existing one erases the original.
PROGRAMMING A FAVORITE CHANNEL MACRO
With so many channels available on your cable or satellite system, you can program a macro that directly selects a favorite channel with one key press.
For example, let’s assume your favorite cable programs are on channel 71. Use the following instructions to program a macro for direct access of this channel:
NOTE: . The following example assumes all equipment is turned off and that the TV is connected through the Cable Box with TV tuning set to channel 3.
1.Press and hold SETUP until the two bottom IR segments flash twice. The Program Keys
appear as SETUP flashes repeatedly.
2.Press MACRO once.The Macro programming screen appears:
3.Press an open Macro Key
(e.g.,M1,M2,M3, or M4). The last- selected device menu screen, including HOME, appears.
4. Enter a macro sequence of up to 15 key presses. For this example, press TV once, followed by POWER once, and then enter 0 3 for the TV’s channel number. Next, press CBL/SAT once, followed by POWER once, and then enter 0 7 1 for the Cable Box’s channel number.
NOTE: If there are more than 15 key presses in the sequence, the bottom IR segments display a long flash denoting an error. The display returns to the
30 |
|
|
| Using Macros | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
