OFA Kameleon wRF UG rev 3.fm Page 20 Monday, September 13, 2004 11:18 AM
KAMELEON 8-DEVICE REMOTE WITH RF
6.To lock the code, press OK once.The two bottom IR segments flash twice.
7.To search for codes of your other devices, repeat steps 3 to 6.
8.To exit programming, press HOME twice. The display returns to the last- selected device menu screen.
CHECKING THE CODES
If you have set up the remote control using the Searching For Your Code procedure (on the left), you may need to find out which code is operating your equipment. For example, to find out which code is operating your TV:
1.Press and hold SETUP until the two bottom IR segments flash twice. The Program Keys
appear as SETUP flashes repeatedly.
2.Press OTHER once.The Other programming screen appears:
3.Using the Number Keys, enter 9 9 0.
The bottom two IR segments flash twice.
4. Press a device key once (i.e., AUX, CBL/ SAT, CD, TV, DVD, AUDIO, VCR, or PVR). The selected device key animates.
5. To view the code for the first digit, press
1once.Count the number of times the
two bottom IR segments flash (e.g., three flashes = 3) and write down the number in leftmost box in the TV code boxes on page 17.
NOTE: If a code digit is “0”, the two bottom IR segments do not flash.
6.Repeat step 5 three more times for remaining digits.Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit.Write down the code digits in the remaining TV code boxes on page 17.
20 |
|
|
| Checking The Codes | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
