OFA Kameleon wRF UG rev 3.fm Page 4 Monday, September 13, 2004 11:18 AM
KAMELEON 8-DEVICE REMOTE WITH RF
INSTALLING BATTERIES
❶
❷
NOTE: The two bottom segments of the IR indicator flash when the batteries are running low. The batteries need replacement if one of the following conditions occurs:
1.Pressing any key turns on all keys and icons.
2.The vibration switch no longer activates the display (if the vibration switch feature is still enabled).
3.Pressing a key while the screen is off causes all of the keys and icons to turn on.
See “Battery Use And Safety” on page 66 for additional information.
❸
1.On the remote control’s back, push the tab and lift off the battery cover.
2.Obtain four (4) new AAA alkaline batteries. Match the + and – marks on the batteries to the + and – marks in the battery case, then insert the new batteries.
3.Press the battery cover back into place. The tab should click when the cover is locked.
4.Once the batteries are inserted correctly, press anywhere in the middle part of the screen. The display will turn on and show all keys. If a key is not pressed after the display turns on, the display will turn off. The display can be turned on by moving the unit or by pressing on the center of the screen.
4 |
|
|
| Installing Batteries | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
